7 Easy Processors Plans You Can Build at Home, Anytime, Anywhere. Almost for Free
How to Easily Build a Bio diesel Processor...

7 Reactor Plans You Can Build At Home, In Your Spare Time: A How-To Guide.
...For Less Than the Cost of One Night
Out.
OK, all the biodiesel processor kits on this page are between $300 and $1000 and carry my recommendation. They should all make
quality home-brew. These are a good compromise between a more expensive processor kits which have more bells and whistles and building your
own from scrounging dump material. Kits have a definite advantage. One, no messing around looking for material. It arrives at your door,
everything in place, everything ready to go. Two, others before you have added features you might not think of. Three, the time factor. It
takes less time building, which equals, the sooner you can be using your own products and saving money. If this something that interests
you, keep reading...
Why?
-
One, because for one all of the processors featured here are "closed" system processors. What this means is that in an
enclosed system the fumes don't escape while mixing. This is important. These fumes can be extremely hazardous. You need to
take this into account from the very beginning of the planning process and plan for safety.
-
Two, Say what you want but a biodiesel processor made from a hot water heater makes good sense to me. I
still haven't been convinced that the plastic tank processors can heat the oil, and keep it heated, especially in cold weather
climates.
With a hot water tank or "appleseed" processor you don't have that problem...they are made to be heated, have the
heating element and the insulation built in. This makes good sense.
Appleseed Processor Kit
Price: $299.95

(Wish I had a better picture. Sorry!)
This Processor can be assembled onto your water heater in an afternoon at a small fraction of
the cost of those plastic processors and its all steel processor tank is safer than plastic. A plastic tank can stretch and leak if hot oil
is loaded into them. The steel tank used with the Processor Kit can be run at optimum conversion temperatures (130 F to 140 F) without fear
of leaking.
Biodiesel Processing System
Price: $439.95 
We have bundled three great kits and added a scale to
provide you with one click ordering of everything you need to get started.
At the heart of the System is an Appleseed processor that you can assemble onto your electric water heater. This steel tank will not stretch and
leak when loaded with hot oil like a plastic tank processor. This system has been proven to be able to make ASTM spec biodiesel and is in use by
thousands across the country.
35 Gallon Deluxe DIY Processor
Price: $699
This kit contains everything you need to make bio diesel at home. In addition to the standard DIY Kit, we deliver a 50 gallon
water heater to your door. A full set of directions is included. It only takes a few hours to assemble. This kit makes up to 35 gallons per
batch of useable fuel in just 3 hours of processing time. Make your own fuel for as little as $0.70 per gallon! Other kits sell for
$3,000.00 and don't heat oil properly for winter processing.
55 Gallon Deluxe DIY Processor Kit
Price: $999
This kit contains everything you need to make a processor at home. In addition to the standard DIY Kit, we deliver a 80 gallon
water heater to your door. A full set of directions is included. It only takes a few hours to assemble. Make your own fuel for as little as
$0.70 per gallon! This biodiesel kit produces 55 gallons of useable fuel in about three hours of processing time. Other
processors sell for $3,000.00 and don't heat oil properly for winter processing.
No matter which kit you choose, you're taking a positive step forward and reducing your own energy dependence. Even if you take a small step
forward and are able to reduce your "retail" energy needs, the resulting savings are well worth it. Luckily, there are many excellent providers
of kits out there. As you go through these pages, we'll introduce you to a few.
Or, you can also move on to...
|